When a device is disconnected from EMS or could not be pinged through or telneted remo
tely, we can locate the failure through steps below:
tely, we can locate the failure through steps below:
A. Execute diagnosis command to check CV info display and current MEP alarm display
B.Execute diagnosis command to check whether mep configuration status and packet receiving status are normal
C.Execute diagnosis command to check whether OAM has been delivered to the drive correctly.
D.Execute diagnosis command to check whether meg binding relation is normal
B.To test SSF alarm function, AIS function needs to be enabled.
C.When on-demand LM function is enabled, you can set local LM or peer LM function and parameters like packet forwarding priority, sending interval, report interval and test time.
D.Forwarding priority of CV packet can be set randomly.
B. To select endpoint for end-to-end PTN Ethernet service, first select NE and then corresponding port or UNI interface
C. To create TREE service, all CIP/VIP nodes have leaf attributes and root attributes when ZXCTN6000 device acts as root node
D. To create TREE service, all PWs and CIPs have hub attributes and spoke attributes when ZXCTN9000 (2.08 32R1) acts as root node