我司PTN设备使用下面哪个命令,可以查看所有设备配置的所有ip地址?
A.show ip config
B.show ip interface brief
C.show interface ip brief
D.show ip config all
A.show ip config
B.show ip interface brief
C.show interface ip brief
D.show ip config all
A.show load-mode
B.show start-mode
C.show system-configuration recoverset
D.show system load-mode
A.若系统提示同路由电路数量为0,仍然有可能实际上有主、备同路由的电路
B.进行电路的主、备同路由分析并确认无任何同路由电路后,可以不再从PTN环的维度分析环上光路是否存在同路由问题
C.若系统提示同路由电路数量为0,则表示实际上已经完全不存在主、备同路由的电路
A.升级boot版本时,仅能在隐藏模式下进行升级,使用bootrom update命令进行升级
B.如果升级boot没有成功,请不要重启单板,尝试再次升级。为防止升级过程断电导致boot异常,升级前请准备少量的boot备用
C.CPLD升级有远程软件升级和通过线缆升级两种方式,在远程升级失败时,需要现场使用线缆升级或者更换单板
D.升级过程中可通过show process查看单板是否上线,注意对应各槽位号;Show bootrom查看各板卡boot版本类型
A.showipospfborder-router
B.showipospfdatabase
C.showipospfneighbor
D.showipospfinterface
A.我司的网络出口带宽小、在晚上高峰期出现拥塞
B.我司的ONU及其以上设备或线路不稳定导致经常断线
C.客户路由器设置了时间策略,只许在8:00-20:30能上网
D.客户电脑中病毒导致
A.select*fromv$instance
B.select*fromv$sessionwherestatus=''ACTIVE''
C.showparametersession
D.select*fromv$session
A.crontab-l
B.cron-lroot
C.lscron-lroot
D.cat/var/cron/crontabs/root